Sales Portfolio

On behalf of sellers, Dixon Marine Consulting Ltd and M&E Partners LLC are pleased to present the 18″ x 16″ Cutterhead Dredge ‘Edward G’ which is under refurbishment and is available for immediate sale on an “as is where is” basis (i.e. incomplete / disassembled), ex-US GOM. Sellers are keen to complete a quick sale and interested parties are recommended to submit sensible offers asap.

Click here to view assets:
Edward G 16×18 CSD

Her main specifications are as summarized below:

Overall dimensions

• Overall length assembled – 118’
• Overall Beam 27’-7.5”

Hull Dimensions

• Side sections – 75’ x 7’10.5” x 5’
• Centre section – 42’ x 11’10.5” x 5’
• Assembled dimensions – 75’ x 27’7.5” x 5’

Operating conditions

• Dredge Digging Depth
• Minimum – 4’
• Maximum – 58’

Maximum cut of dredge (single cut)

• At Minimum digging depth – 153’
• At Maximum digging depth – 120’

Equipment detail

• Main Pump – Metso/ Thomas P-40 18”x16”x40” impeller
• Main Engine – Caterpillar 3508 DITA, max HP – 1000HP @ 1800RPM
• Auxiliary Engine – Caterpillar 3406 DITA, max HP 440HP @ 1800RPM
• Reduction Gear – Twin Disc MG 6690, RATIO 2.93:1, raw water cooling
• Service Water Pump (driven by CAT 3406) – Peerless 2.5” x 2” 10”
• Ladder – 60’ long, W 27 × 84 beam
• Cutter Module – Gear (Regianna) RR5000TM, cutter diameter 48” ID
• Swing Winches – Pullmaster H25-8-86-2
• Ladder Winch – Pullmaster M12-3-97-7
• Spud Winches – Pullmaster H-12-3-97-2

Suction/ Discharge Piping

• Suction – 18”x3/8” wall thickness
• Discharge – 16”x3/8” wall thickness

16″ Skid-Mounted Booster Pump (Detroit 12V-149 1000 HP)

• AMSCO Type 83B Dredge Pump
• 44″ diameter RH impeller driven by 44″ OD pulley
• 16″ diameter suction and 16″ diameter discharge

More photos are available to view online: View Photos

NB: The following items/ equipment are excluded from the sale:

• 8 feet of flexible pipe from the suction pipe to the dredge pump
• Hypack
• GPS
• 2 (20x60x5/8) Spuds
• AIS (Automatic Identification System

For avoidance of doubt, the dredge is undergoing refurbishment and upgrade and is being offered for sale in her current (incomplete / disassembled) condition. Some of the replacement parts are in storage at a separate location, and included with the sale, but Buyer will need to complete the refurbishment / reassembly. For more details or to arrange an inspection, please contact M&E / DMC on the following numbers:

LOCATION: Gulf Of Mexico
INSPECTION: By appointment only

For more information please contact:

Jody Bacque (M&E): +1 (251) 404-2367
Walter Boasso (M&E): +1 ( 504) 579-4827